Double Lip Oil Seal Mud Pump Crosshead 5″× 6.25″× 0.625″ AH36001-04.08A

Product Description

Double Lip Oil Seal 5″× 6.25″× 0.625″, Mud Pump Crosshead AH36001-04.08A was used in Mud Pump corsshead.

Mud pump oil seal is the main seal in the crosshead system of the power end of the mud pump. The material is nylon, which belongs to the vulnerable parts of the mud pump.The oil seal ring is installed in the packing box and ACTS as a seal.

O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable and have simple mounting requirements. They have been tested to seal up to 5000 psi (35 megapascals) of pressure. The maximum recommended pressure of an O-ring seal depends on the seal hardness and gland clearance.

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.

The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons. Static applications of O-rings may include fluid or gas sealing applications in which: (1) the O-ring is compressed resulting in zero clearance, (2) the O-ring material is vulcanized solid such that it is impermeable to the fluid or gas, and (3) the O-ring material is resistant to degradation by the fluid or gas.

Mud Pump Parts Model We Can Do